
Full home renovation
Full home renovation in Barcelona
Flats and houses renovated from start to finish: layout, installations and finishes planned as a single project.
- Market reference, mid-range
- €400 – €700 per m²
- Area
- Barcelona and metropolitan area
In short
Nuevas Reformas Barcelona carries out full renovations of flats and houses in Barcelona and its metropolitan area. A full renovation renews the entire home: layout, electrical and plumbing installations, flooring, wall finishes, joinery, kitchen and bathrooms. On this page you can work out an indicative range by floor area and finish level, based on published market prices, and request a quote with those details.
Ideas for renovating your flat
Current styles, materials and layouts as a starting point. If one looks like what you have in mind, tell us when you ask for a quote.
What a full renovation usually includes
Every home is different, but a complete full renovation almost always covers these items. The exact scope of each project is set out in its quote.
Demolition and rubble
Removing partition walls, finishes, sanitaryware and furniture that are not kept, including rubble disposal.
Layout and building work
New partition walls, opening up spaces, channels for installations and floor levelling.
Electrical installation
New wiring, consumer unit, switches, sockets and light points, adapted to the new layout.
Plumbing and drainage
New water pipes and drains for the kitchen and bathrooms.
Heating and cooling
Installation or pre-installation of heating and air conditioning when the project includes it.
Floors, walls and ceilings
Flooring, tiling, suspended ceilings, painting and finishing touches.
Joinery
Interior doors, built-in wardrobes and, if they are replaced, windows.
Kitchen and bathrooms
They are usually renovated as part of the full renovation, with their cabinetry, sanitaryware and taps.
How a full renovation unfolds
This is the usual order of the work. Each project adapts the detail to its home.
Measuring and survey
The home is measured and the state of installations, walls and finishes is checked.
Design and quote
Layout, materials and finish level are agreed, and with them the quote.
Demolition
Everything that is not kept is removed and the home is prepared for the installations.
Installations
Electrics, plumbing and heating or cooling are done before walls and ceilings are closed.
Building work and finishes
Partition walls, flooring, tiling, joinery and painting.
Fitting and handover
Kitchen, sanitaryware, switches and a final clean before handing the home over.
Three ways to approach a full renovation
The approach decides the scope of the work more than the floor area itself.
Keeping the layout
Installations and finishes are renewed without moving walls. It is the most contained approach and the quickest to define.
With a new layout
The floor plan is rethought: opening the kitchen to the living room, adding a bathroom or joining rooms. It adds demolition, new installations and more finishes.
Older flat with original features
In many older Barcelona buildings, owners want to keep high ceilings, mouldings, beams or encaustic tiles and combine them with new installations.
What changes from one finish level to another
An indicative guide: every project and manufacturer has nuances, but these are the typical differences between levels.
| Item | Basic | Mid-range | High-end |
|---|---|---|---|
| Flooring | Entry-level laminate or ceramic tiles | Mid-range porcelain or engineered wood | Solid wood, stone or large-format porcelain |
| Doors | Standard flush doors | Lacquered doors | Bespoke, floor-to-ceiling doors |
| Kitchen | Entry-level cabinetry | Mid-range cabinetry and quartz worktop | Bespoke cabinetry and stone or porcelain worktop |
| Bathrooms | Standard sanitaryware and taps | Low-profile shower tray and wall-hung sanitaryware | Concealed taps and bespoke shower screen |
| Heating and cooling | Pre-installation | Split air conditioning | Aerothermal heat pump or underfloor heating |
What drives the cost of a full renovation
The calculator applies published market prices. These are the variables that change the real result the most:
See the price guideThe state of the installations: whether the wiring and plumbing need replacing entirely.
Layout changes: how many walls move and whether the kitchen or bathrooms change place.
The quality of flooring, joinery, kitchen and sanitaryware.
The real usable floor area of the home.
The building: floor height, lift and access for materials and rubble.
Estimate your renovation cost
Adjust the size and finish level, then request a quote with those details.
Indicative range: €32,000 – €56,000
Indicative range
VAT included
- Type of renovation
- Full renovation
- Size
- 80 m²
- Finish level
- Mid-range
This is a market reference, not a quote. The real price depends on visiting the property.
Quote
Request your quote
Leave your details and tell us about your project. If you come from the calculator, your configuration is sent with the request.
Frequently asked questions
What is the difference between a full renovation and a partial one?
A full renovation renews the entire home: installations, the layout where needed, flooring, wall finishes, joinery, kitchen and bathrooms. A partial renovation only works on one area, such as the kitchen or a bathroom, and leaves the rest as it is.
Can you live at home during a full renovation?
Usually not, because for much of the work there is no usable water, electricity or kitchen, and there is dust and noise throughout the home. If the renovation is planned in phases, it can be assessed case by case.
How much does a full renovation cost in Barcelona?
It depends mainly on the floor area, the state of the installations, whether the layout changes and the finish level chosen. The calculator on this page gives an indicative range based on published market prices, and the price guide breaks it down by finish level and size.
Should you replace the windows in a full renovation?
If the windows are old, a full renovation is a good time to replace them: it is done together with the other finishes and avoids touching up paint or wall finishes afterwards. New windows also improve thermal and acoustic insulation.
What needs deciding before the work starts?
The essentials are the layout, the finish level for flooring, kitchen and bathrooms, and which installations are being replaced. The better defined the project is before starting, the fewer changes there will be during the work and the more reliable the quote will be.
Can original features of an older flat be kept?
Yes. Many older Barcelona flats keep their high ceilings, mouldings, beams or encaustic tiles and combine them with new installations and finishes. It is worth checking their condition at the start, because it shapes the rest of the project.
Key points
A full renovation renews the entire home: installations, layout, finishes, kitchen and bathrooms.
The cost depends mainly on the state of the installations, layout changes and the finish level.
The calculator gives an indicative range based on published market prices for Barcelona, with its source and date.
The final quote is agreed after surveying the home.




